CYP CP-263D, Operation Manuals

Page: 1 / 4

DVI Repeater
The CP-263D boosts DVI source signal and extends the
range of DVI signal transmission over a copper based
cable by 12 meters at 1080p/UXGA.
It can also be cascaded in multiple stages to achieve
maximum transmission distance.
Operation Manual
Operation Controls and Functions
DC 5V 2A DVI INPUT DVI OUTPUT
Connection and Installation
PC Monitor
Features
* Correct signal error and boost signal strength for extending transmission range.
* Extends 1080p/UXGA up to 12 meters transmission distance.
( lower resolution signal can be transmitted longer)
* DDC pass through.
* HDCP compliant.
Specifications
* Compliant with DVI Rev1.0
* HDCP 1.1 compliant
* Downward compatible to HDCP 1.0
* Operation frequency
：
up to 165MHz
* DVI data rate: 1.65Gbps (single Link)
* Input/Output resolution
：
* Cable Distance Support
：
12m with twisted-pair
* Dimensions (WxHxD)
：
76 x 30 x 105mm
* Power
：
5V 2A Center- positive
Note: Different cable quality may affect the maximum resolution and
transmission distance.
PC
：
VGA@60Hz
、
VGA@72Hz
、
VGA@75Hz
、
VGA@85Hz
SVGA@60Hz
、
SVGA@72Hz
、
SVGA@75Hz
、
SVGA@85Hz
XGA@60Hz
、
XGA@70Hz
、
XGA@75Hz
、
XGA@85Hz
、
XGA@87Hz
、
SXGA@60Hz
、
SXGA@75Hz
、
SXGA@85Hz
、
UXGA@60Hz
、
1152@70Hz
、
1152@75Hz
、
1152@85Hz
HD
：
480i@60Hz
、
576i@50Hz
、
480p@60Hz
、
576p@50Hz
、
720p@60Hz
、
720p@50Hz
、
1080i@60Hz
、
1080i@50Hz
、
1080p@60Hz
、
1080p@50Hz
、
1080p@30Hz
、
1080p@25Hz
、
1080p@24Hz
3 4
2 1
1. DVI input connector: It accepts only DVI-D signal from DVI sources,
such as PC with DVI graphic card or DVD player with DVI output,
analog RGB signal is not supported.
2. Power input: Connect the supplied DC 5V power supply into this unit.
3. Power LED: The LED will illuminate when the power is connected.
4. DVI output connector: Connect to the DVI input of PC monitor, projector,
LCD or PDP display unit.
Rear Panel
Front Panel
DVI-D Pin Configuration
1 8 C1 C2
C5
C4
C3
9
17 24
Digital only connector pin assignments
Pin Signal Assignment Pin Signal Assignment
1
2
3
4
5
6
7
8
C1
C4
T.M.D.S Data2-
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
N.C.
N.C.
DDC Clock
DDC Data
No Connect
N.C.
N.C.
9
10
11
12
13
14
15
16
C2
C5
T.M.D.S Data1-
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
N.C.
N.C.
+5V Power
Ground (for +5V)
Hot Plug Detect
N.C.
N.C.
Pin Signal Assignment
17
18
19
20
21
22
23
24
C3
T.M.D.S Data0-
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
N.C.
N.C.
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock-
N.C.
DVI-Digital(DVI-D): Supports digital-only connections between the host computer
and display. This interface is designed for A 12 or 24-pin connection to enable
single or dual-link mode activation.
DVI Cable
DVI Cable
DVI Cable
HDMI
HDMI
DVI to
HDMI
cable
or
Note: DVI repeater can be cascaded in multiple tiers.
12M
12M