CynkoMet T-104, Instructions For Use And Operation

Page: 49 / 128

Cynko Met
T-104/6
49
Disconnect the second trailer

Immobilize the tractor and trailer with a parking brake.
 Stop the tractor engine. Close the cab of the tractor protecting it
from unauthorized access.

Disconnect the pneumatic, hydraulic and electric hoses

Unlock the swivel hook in the first trailer. Remove the swivel and
drive the tractor away
4.3.5 Loading the crate.
CAUTION!
CAUTION!
Loading of the crate can take place only when the
trailer is connected to the tractor, set on level
ground with the drawbar directed to drive forward
and braked
You should aim for even load distribution in the loading
crate. When loading, it is recommended to use a crane, loader or
conveyor. Before loading, check that the locks, wall hinges and the
dump window in the rear wall are closed. If the trailer is equipped
with tarpaulin, then before loading from "above" you should
remove the tarpaulin and / or disassemble its frame.
When transporting materials exerting point pressure on the
floor of the loading crate (e.g. large stones). before loading you
should plant thick boards, thick plywood, etc. This will enable to
achieve an even surface of the floor load and protect it from
damage.
Lightweight, volumetric materials may be loaded above
loading crate extensions, but no more than 5 cm above, paying
particular attention to the stability of the trailer and cargo, and
protection against road littering. When transporting light
materials, it is allowed to use the trailer without cables connecting