CynkoMet T-104, Instructions For Use And Operation

Page: 18 / 128

Cynko Met
T-104/6
18

In case of failure of the hydraulic or pneumatic installation, the
trailer should be out of operation until failure removal.
 When connecting the hydraulic hoses to the tractor, pay attention
that the hydraulic system of the tractor and the trailer are not
under pressure. If necessary, reduce the residual pressure system.

In the case of injury with a strong jet of hydraulic oil should,
immediately consult a doctor. The hydraulic oil can penetrate the
skin and cause an infection. If the oil gets into your eyes, rinse with
plenty of water and consult a doctor.

In the event of contact of oil with skin, wash the dirty spot with
soap and water. Do not use organic solvents (petrol, kerosene).

Use the hydraulic oil recommended by the Manufacturer.

After replacing the hydraulic oil, the used oil must be disposed of
Used oil or one that has lost its properties should be stored in its
original containers or in substitute packages which are
hydrocarbon-resistant. Replacement containers must be carefully
described and stored properly.

It is forbidden to store hydraulic oil in packaging designed for
food storage.

Rubber hydraulic couplings must be replaced every 4 years
regardless of their technical condition. Replacing the coupling
must comply with the technical requirements of the manufacturer.
3.6 Maintenance.
 Repair, maintenance and cleaning jobs and the removal of
function faults is to be performed with the engine of the tractor
stopped and the ignition key taken out.
 During maintenance of the raised loading crate, it is advisable to
protect it before falling with the help of the service support.