Cynko
Met
T-104/6
17
3.4
Driving wheels
When working with the driving wheels, secure the trailer, in case
of self-launching of movement, using the parking brake and
wheel chocks.
Repair work on the tires and wheels should be performed by tr
using appropriate tools.
After each installation of a wheel, tighten the nuts after the first 10
working hours, then every 50 working hours to check their
screwing according to (Table 8).
The air pressure is to be checked regularly. Observe the
recommended air pressure.
Dismantling the wheels can be carried out only in the case when
the trailer is not loaded.
Avoid damaged road surface, quick and variable maneuvers and
high speed during turns.
Tire valves are to be protected with caps to prevent penetration of
impurities.
3.5
The pneumatic and hydraulic system
The hydraulic and pneumatic installations during operation are
under high pressure.
Regularly check the technical condition of the connections and the
hydraulic and pneumatic systems. Oil leaks and air leaks are
unacceptable.
The shut-off valve in the hydraulic system of the lift limits the
angle of the load crate declination when tilting it sideways and
backwards. The length of the cable controlling that valve is set by
the manufacturer and may not be adjusted during use of the
trailer.
Summary of Contents for T-104
