CynkoMet N-235 Series, Instructions For Use And Operation

Page: 77 / 124

Cynko Met
N-233
77
Detailed warranty conditions are mentioned in the warranty card attached
to each newly purchased machine.
NOTE!
NOTE!
It is advisable to require from the seller to fill in the warranty
card and reclamation coupons. Lack of e.g. the date of sale or
point of sale stamp exposes the user to non-recognition of any
complaints.
10. Environmental hazard
Hydraulic oil leakage is a direct threat to the environment because of
the limited biodegradability of the substance.
The created layer of oil on the water can a result of direct physical
action on organisms, can cause change in the oxygen content in the water
due to absence of direct contact of the air with water.
Maintenance - repair work at the time of which there is a risk of
leakage should be performed in rooms with oil resistant surface.
In the event of an oil spill, you must first secure the source of the leak,
and then collect the spilled oil using available means. Collect the oil residues
using sorbents, or mix the oil with sand, sawdust or other absorbent
materials. The collected oil waste should be kept in a sealed and marked
container, resistant to hydrocarbons. The container should be kept away
from heat sources, flammable materials and food.
NOTE!
NOTE!
Used hydraulic oil or gathered remains mixed with absorbent
material should be stored in a carefully marked container. For
this purpose, do not use food containers.
Used oil or unsuitable for reuse due to the loss of its properties should
be stored in its original packaging in the same conditions as previously
described. Oil waste must be transferred to a point taking care of recycling
or oils regeneration. Waste code: 13 01 10. Detailed information concerning
hydraulic oil can be found in the safety data sheet.