Cynko
Met
N-200
Page 49
In order to avoid compression of the walls to the inside the spreader,
when loading with the use of a crane, use a special traverse, where the places
of hooking the belts will be spaced wider than the total width of the machine.
The spreader should be attached firmly to the platform of the transport
mean with belts, chains, lashing or other fastening means equipped with a
tightening mechanism. Frayed belts, cracked mounting brackets, opened or
corroded hooks or other damage may disqualify the given mean for use.
Under the wheels of the spreader chocks, it is advisable to put wooden
beams or other elements without sharp edges, preventing the machine from
rolling. The spreader wheels chocks must be attached to the loading platform
of the car so as to prevent their shifting.
NOTE!
The driver of the car, while transporting the machine, should
take extra caution.
6.
Spreader cassation
Should the user make a decision on cassation of the machine, he must
pass the entire spreader to the scrap depot designated by the Governor or a
Starost.
The dismounted parts remaining after repair of the spreader must be
submitted to the collection point of recyclable materials.
