STEREO (ST) MODE OPERATIONS AND MENUS
19
User Manual
LP-16
October 2015
13.2. Stereo Mode Menus
Pressing the Menu Button while in stereo mode will take you to the Stereo Mode Menu.
Use the Up/Down buttons, to navigate to the desired menu setting. Use the Select button to choose the settings. Use
Up/Down to modifiy values and Select to confirm the changes. Back button can be used to go one level back without
changing the parameters.
13.2.1. Playback Mode
This menu allows you to set the stereo playback mode in LP-16:
Playlist: Files within a playlist will be played back as they are configured to playback using uTool.
Single: Only a single song will be played back until the end.
Repeat all: All the songs of the currently active folder will be played back repeatedly.
Repeat one: A single song is repeatedly played back.
Shuffle: The LP-16 will shuffle the songs in a folder for playback.
The currently selected playback mode will be shown, as an icon, at the top of the home page, to the left of the
time counter.
13.2.2. Play-out Channels
This menu allows you to set which specific pair of rear-panel outputs the stereo audio file will be output to.
Use the up/down buttons to change the channels and use Select button to choose the playout channels.
NOTE: Rest of the menu options are common with MT menu and are explained in the
