Troubleshooting
Action
Type of fault on the
display
Front display
Clear the drainage pump. See the section Care and cleaning. If the problem persists, call
the service division.
Overfilling 1
F10
See “Water remains in the dishwasher” in the table “Problem” below. If the problem persists,
call the service division.
Water outlet fault
F11
Check that the water tap is on. Check that the outer filter on the inlet hose is not blocked.
If the problem persists, call the service division.
Water inlet fault
F12
Turn off the water tap and call the service division.
Inlet valve leakage
F40
Check plugs/fuses. If the problem persists, cut the power using the property’s main power
switch and call the service division.
Temp. stop fault 3
F41
Call the service division.
Thermistor fault 1
F42
Call the service division.
Pressure sensor fault
1
F43
Call the service division.
Pressure sensor fault
2
F47
Call the service division.
Thermistor fault 2
F48
Call the service division.
Temp. stop fault 1
F49
Call the service division.
Temp. stop fault 2
F50
Check plugs/fuses. If the problem persists, cut the power using the property’s main power
switch and call the service division.
Temp. stop fault 4
F51
Check that the outer filter on the inlet hose is not blocked. If the problem persists, call the
service division.
Water level fault
F52
Interrupt the programme by opening the door, press and hold Start/Stopp (Start/Stop) for
three seconds. Restart the dishwasher. If the problem persists, call the service division.
Circulation fault
F53
Turn off the water tap and call the service division.
Overfilling 2
F54
(MCU is an abbreviation of "Motor Control Unit"). Call the service division.
Communication fault
MCU
F55
Call the service division.
Circulation fault
F56
(MCU is an abbreviation of "Motor Control Unit"). Call the service division.
Version MCU Fault
F57
(UIC is an abbreviation of "User Interface Control"). Call the service division.
Communication fault
UIC
F58
(UIC is an abbreviation of "User Interface Control"). Call the service division.
Version UIC fault
F59
Call the service division.
Unknown fault
F60
Press any button to clear the error message.
40