Operating Instructions | GPM 450 SPEED
4
1. INTRODUCTION
We are presenting you with Operating Instructions that contain machine technical data and instructions
necessary for correct setting, machine start-up, operation and maintenance.
Instructions are intended for machine operation as well as for service engineers. People manipulating,
installing and operating the machine should familiarise themselves with the instructions before they start.
We would like to emphasize that service operations can be executed only by an authorized person with
proper qualification. This person should be thoroughly familiar with control and all functions of the machine.
Any repair done without authorization can lead to a breach of the warranty. We are referring to section 2.2
– Work Safety and Health Protection providing basic information about safety during work with the machine
and an operator's health protection. Please pay due attention to this section. Be aware that the final
responsibility lies with the individuals working with the machine.
The machine construction complies with the Directive 98/37/EC of the European Parliament and of the
Council. If all the instructions in this document are respected, you will be satisfied with precision and
performance of the machine.
We can assure you the machine received maximum care. Thoroughness of control ensures machine
precision within the scope of the acceptance standards applicable for this machine. We believe these
Operating Instructions will be a valuable guide for you.
