Revision A.5
Cyclops Storm OSD tpalshadow English Translation
10
Option
Usage
Comments
MAX
RECORDING
Use to record
maximum values of
flight data
When set to “ON” the STORM OSD will record the max speed, max
distance, max height, and max lift rate after the aircraft. If the max
recorded speed is lower than 10km/h (6.2MPH) and the max recorded
height is lower than 10m (32.8ft), the STORM OSD will display the max
records with the word MAX flashing on the screen.
HEADING HOLD
PA Heading mode
selection
This option allows you to utilize course lock when in PA mode.
RTH ALT HOLD
RTH mode
selection
You can choose to lock the current height at time of RTH activation or
utilize a preset height in RTH mode. If this option is off (set to N), the
plane will climb/descend to the preset height.
VIDEO FORMAT
Video format
selection
Video input format choices are PAL, NTSC and AUTO. If you choose
the AUTO option the OSD will automatically adjust the OSD display
according to the input video format. The system will default to PAL
when no video input is detected.
AHI ON
Display the AHI
onscreen
You may choose to show or hide the AHI (Artificial Horizon Indicator)
on the operating screen. The size of the AHI may be adjusted to fit
your monitor using the percentage values.
PA SAFE RANGE
Activate fence
mode
In PA mode if your aircraft range is greater than the value set here the
STORM OSD will automatically enter RTH mode until you switch back
to manual mode. Set this value to 0 to disable fence mode.
GPS DATA
Display GPS data
on-screen
You may choose to display the GPS coordinates on-screen. If this
option is set to ‘Y’ the coordinates will show on every operating
screen. If set to ‘N’ it will display only on the RTH screen.
EXIT
Exit the setting menu
When you exit the menu, the STORM OSD will save all settings.
MENU PAGE TWO OPTIONS AND USAGE
