smart
link²
Guide
Product Description
smart
link
s are wireless load sensors, manufactured in titanium to be the lightest, strongest and smallest load sensors on
the market. Designed in collaboration with leading race teams, smart
link
will help you measure and repeat your fast
settings every time.
How it works
…
Simply add inline of any ‘soft’ stay or sheet. Easily connect the sensor to your phone via the latest smartphone app or to
marine electronics via optional smart
fittings
gateway for immediate load data.
Correct loading with soft lines
smart
link
is designed to be loaded inline with soft
lines/rope/strops,
for
the
most
accurate
load
measurement. If smart
link
is loaded in a bridle
configuration the displayed load will be inaccurate.
Figure 1 Incorrect and correct strop loading
Use of metal shackles/pins directly on smart
link
is not
advised as it may mark the titanium body and could cause
permanent damage.
Strops
The strops used for final calibration are built using wound
Dyneema cored basket loops, to the below finished
diameter. Cyclops Marine recommends using strops built to
this diameter to achieve the stated ±1% of maximum
working load (MWL) accuracy.
Contact us for pricing and availability of strops.
Model
Nano
2t
5t
10t
20t
Finished
Diameter (mm)
4.0
9.0
10.7
12.4
15.0
Safety
Please read all instructions before using smart
link
to
measure loads. Always perform a safety evaluation before
use to ensure that use of the sensor is not dangerous to
nearby people or property.
smart
link
is not intended to support personnel working
aloft. Please follow all standard working aloft safety
procedures.
Overload
The MWL of a smart
link
must not be exceeded, as this may
cause damage to the internal instrumentation and will
invalidate the warranty.
SHOCK LOADING (i.e. strop failure) OR OVERLOADING TO
150% OF MWL WILL RESULT IN PERMANENT DAMAGE TO
THE SENSOR THAT WILL REQUIRE RECALIBRATION
Calibration
If smart
link
has been under load for a significant length of
time, the sensor may take 1-2 minutes to return to zero
when the load is removed. This is to be expected.
A significant impact to the body of the sensor can affect
the calibration. This would require the device to be
returned to Cyclops for inspection and re-calibration.
smart
power
button
smart
link²
has 3 modes: powered on, extended use & off.
Mode
Powered on
Extended use Powered off
A quick button
press shows
Green flash
Red flash
Red flash
How to
activate mode
Long press to
green flash
Long press to
red flash
Very long press
to red flash x2
Frequency
1 Hz
0.25Hz
No data
Ideal for
General
usage
Battery
saving
Shipping
Battery life
2000 hrs
8000 hrs
2 years
Extended use & powered off modes can only be activated
from powered on mode.
smartlink² WC guide issue 1 EN
