10
11
WARNING! The Cyclevision Helmet must be adjusted before each ride.
Step 1 - Retention System
Before putting on the Cyclevision Helmet, completely loosen the rotary
retention dial (1), place the Helmet on your head and rotate the dial to
tighten the Helmet for a snug and comfortable fit. The Helmet should not
feel loose on the head.
Step 2 - Position
The Cyclevision Helmet should sit level on your head about one or two
finger-widths above your eyebrows. The Helmet should not be worn
sloping back off your head. Tighten the retention system until the Helmet
feels snug.
SETTING UP CYCLEVISION HELMET
SETTING UP CYCLEVISION HELMET
1
Step 3 - Buckle Strap Adjustment
Connect the male/female retention strap buckles, centering them under
the chin. The straps can be adjusted to lengthen or shorten them so the
Helmet stays firm on your head and the straps maintain a firm fit under
your chin.
Step 4 - Side Strap Slider Adjustment
The side strap must be adjusted using the slider to form a “V” shape
under and in front of the ears.
