Figure 10-Control Speed Control Box
TOP
While you threading, you have to following the steps to set up, first choose the mm/inch set the pitch size by
touch screen, and choose the Right hand threador Left hand thread "F" by touch screen, after that choose the
pitch "G" (Figure 12) and engage the lead screw nut "J" (Figure 13) by moving ball handled lever "I" (Figure
13) clockwise. Start the spindle by moving the lever "G" (Figure 12). Move the lever "D" (Figure 12 )to make
movement going left or right. The threading speed is control by server motor , so if your let the spindle speed
faster, the threading speed also will going faster, The rapid speed is control by rapid retract cam "E"
(Figure10 ).
※
CAUTION
：
THIS TOUCH SCREEN CAN DOING THE THREADING PITCH
0.01~6.35mm/4~99TPI. (The following speed depends on material)
FOLLOW SPINDLE SPEED LIMIT FOR THREADING OPERATION
：
Pitch
0.05 ~
1.0mm
1.001 ~
2.0mm
2.01 ~
4.0mm
4.001 ~
6.55mm
25.001 ~
550Tpi
12.001 ~
25Tpi
6.501 ~
12Tpi
3.175 ~
6.5Tpi
Spindle
R.P.M
Limit
3200
1600
800
400
3200
1600
800
400
Figure 11-Control Speed Control Box
