Cyclades AlterPath OnBoard, Administrator'S Manual

Page: 315 / 460

Using the cycli Utility 279
cycli
Options
cycli
Options
Administrators can invoke the
cycli
command with a number of different
options shown in the following table.
cycli
Parameters and Arguments
The OnBoard CLI configuration options are organized in a hierarchy called a
parameter tree. You can use the
get
,
show
, and
list
commands to show
parameters (see “get | show” on page 289 and “list” on page 291). You can
also use the
get
command to show the values of individual parameters at the
end of a branch.
No tools is provided to find out which parameters let you add parameters to
them, and no way exists to find out what values are accepted when setting
Table 9-1:
cycli
Utility Options
Option Description
-1
When entered either in command line or in batch mode with commands
that act on a single parameter, speeds up response time.
-C
Commits changes when quitting.
-f file
Reads commands from file. Used for running commands in batch mode.
-F
Forces login (terminate an existing configuration session, if any). Used
when specifying commands to run in command line or batch mode.
-h
Help. Shows a brief summary of command line options.
-q
Quiet mode. Suppresses messages. Useful only when entering interactive
mode.
-t timeout
Sets the idle timeout in minutes. Default is 10 minutes.
-T
Disables idle timeout (same as -t 0).
-V
Displays the
cycli
version and exits.
--
Signals the end of options and start of cycli commands. If any are
specified,
cycli
goes into command line or batch mode.