Web Manager "Network" Menu Options
243
Configuring Hosts
The following figure shows the dialog that appears when the administrative
user clicks the “Add new host” button on the screen shown in Figure 7-7.
Figure 7-8:
Network
→
Host Table: Add New Host Dialog
When adding a host, the administrative user must enter the information in the
top two bullets below:
•
IP address
•
Name
•
Alias
The “Alias” is optional
T
To Add a New Host
1.
Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager” on page 75, if needed.
2.
Go to Network
→
Host table.
3.
Enter an IP address in the “
IP address
” field.
4.
Enter a hostname in the “Name” field.
5.
Optionally, enter an alias for the host
6.
Click OK.
7.
Click the “Save and apply changes” button.
Summary of Contents for AlterPath OnBoard
