manualshive.com logo in svg

Cyclades AlterPath OnBoard, Administrator'S Manual

The Cyclades AlterPath OnBoard Administrator's Manual is a comprehensive guide to setting up and managing your device. It covers everything from installation to troubleshooting, and is available for free download from our website. Ensure you have the necessary resources at your fingertips to make the most out of your equipment.

Share
Download
background image

Configuring SNMP

 

 

216

AlterPath OnBoard Administrator’s Guide

Figure 6-40:

Config 

→

 Device SNMP Settings Dialog With V3 Selected

Fields and Menu Items for Configuring SNMP for Devices

The following table lists the fields for configuring SNMP for devices.

Table 6-14: 

Fields for Configuring SNMP

Field or Menu 
Name

Description

OID

Object Identifier. Each managed object has a unique identifier. 

SNMP version

v1

v2c

v3

Community

SNMP v1 and v2c only. The community name is sent in every 
communication between the client and the server, and the 
community name must be correct before requests are allowed. 
The most common community is “public,” and it should not be 
used because it is so commonly known. By default, the public 
community cannot access SNMP information on the OnBoard.

Fields for configuring SNMP v3 only:

User name 

Username used for authentication

Auth method

• MD5
• SHA

Summary of Contents for AlterPath OnBoard













































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AlterPath OnBoard

D-Link DSL-500 Command Reference Manual preview
DSL-500
Brand: D-Link Pages: 15
D-Link DWL-G550 Product Data Sheet preview
DWL-G550
Brand: D-Link Pages: 2
Tandberg Data RDX QuikStation 4 Quick Start Manuals preview
RDX QuikStation 4
Brand: Tandberg Data Pages: 2
Freescale Semiconductor MCF54455 Reference Manual preview
MCF54455
Brand: Freescale Semiconductor Pages: 921
Grizzly PSJ-M3 GEN2 User Manual preview
PSJ-M3 GEN2
Brand: Grizzly Pages: 9
Hama 00039747 Operating Instruction preview
00039747
Brand: Hama Pages: 6
SAGEMCOM SE681 WiMAX User Manual preview
SE681 WiMAX
Brand: SAGEMCOM Pages: 75
MC PCIe-DIO96H User Manual preview
PCIe-DIO96H
Brand: MC Pages: 21
insys icom EBW-E Quick Installation Manual preview
EBW-E
Brand: insys icom Pages: 4
Patton electronics Model 2711 User Manual preview
Model 2711
Brand: Patton electronics Pages: 13
Angel Cool Aironet 1200 Quick Start Manual preview
Aironet 1200
Brand: Angel Cool Pages: 2
Uniden Data 2000 Manual preview
Data 2000
Brand: Uniden Pages: 5
Conel UR5i v2 SL User Manual preview
UR5i v2 SL
Brand: Conel Pages: 32
QNAP Turbo NAS TVS-71 Series Hardware User Manual preview
Turbo NAS TVS-71 Series
Brand: QNAP Pages: 51
Longshine LCS-8170 User Manual preview
LCS-8170
Brand: Longshine Pages: 35
HighPoint SSD7540L Quick Installation Manual preview
SSD7540L
Brand: HighPoint Pages: 10
Morrell SW-UNM-24FE2GC-24POE User Manual preview
SW-UNM-24FE2GC-24POE
Brand: Morrell Pages: 8
Aewin Technologies SCB-9651 User Manual preview
SCB-9651
Brand: Aewin Technologies Pages: 86

Brands by name

Popular brands

Load more brands