Configuring Sensor Alarms
206
AlterPath OnBoard Administrator’s Guide
T
To Configure an SNMP Trap Sensor Alarm
Action
1.
Perform Step 1 through Step 8 in the procedure “To Begin Configuring a
Sensor Alarm” on page 202, selecting “SNMP trap” from the “Action”
menu in Step 7.
2.
Select a protocol from the “Protocol” menu.
3.
Enter the OID in the “OID” field.
a.
Select a trap type from the “Generic trap type” field.
b.
If either v1 or v2 is selected in Step a, enter the name of a community
in the “Community” field.
c.
If v3 is selected in Step a, perform the following steps.
i.
Enter the username required for authentication in the “User”
field.
ii.
Choose an authentication type from the “Authentication Type”
pull-down menu.
iii.
Enter the authentication password in the “Password” field.
iv.
Select an encryption method from the “Encryption” pull-down
menu.
Community
SNMP v1 and v2 only. The community name is sent in every
communication between the client and the server, and the
community name must be correct before requests are allowed.
Communities are further defined by the type of access specified
under “Permission”: either read only or read write. The most
common community is “public” and it should not be used
because it is so commonly known. By default, the public
community cannot access SNMP information on the OnBoard.
Server
IP address of the SNMP server
Body
Administrator-chosen text
Table 6-10:
Fields for Configuring a SNMP Trap Sensor Alarms (Continued)
Field or Menu Name
Description
Summary of Contents for AlterPath OnBoard
