Web Manager "Settings" Menu Options
145
Configuring PCMCIA Cards
Figure 5-26:
Settings
→
PCMCIA
→
Configure Modem
→
PPP
T
To Configure a Modem PCMCIA Card
This procedure assumes that a PCMCIA modem card is inserted into a slot on
the OnBoard and the steps under “To Begin Configuring a PCMCIA Card” on
page 142 are complete. See Table 1-20, “Modem Configuration Field and
Menu Definitions,” on page 44 for the values that an administrative user needs
to select or to enter for modem configuration, if needed.
1.
Make sure that “Modem” is selected from the “Card Type” pull-down
menu on the PCMCIA card configuration dialog.
2.
Select either “Login,” “Autodetect,” or “PPP” from the “Modem Access
Type” pull-down menu.
3.
Enter a modem chat string in the “Modem Initialization” field.
4.
To enable callback, do the following steps.
a.
Check the “Call Back” check box.
The Phone Number field appears on the Slot dialog box.
Summary of Contents for AlterPath OnBoard
