Cyclades AlterPath ACS, Command Reference Manual

Page: 152 / 420

136
Network
Setup on the "Road Warrior" machine
Simply add a connection description us-to-Console Server, with the left and right
information you gathered above to the
ipsec.conf file of the warrior system. This might
look like:
IMPORTANT!
The connection name line: "conn us-to-acs" must start on the FIRST column
of the line. All other lines after that line must be indented by 1 TAB. This is MANDATORY.
# pre-configured link to Console Server
conn us-to-acs
# information obtained from Console Server admin
left=1.2.3.4 # Console Server IP address
leftid=@acs.example.com
# real keys are much longer than shown here
leftrsasigkey=0s1LgR7/oUM...
# warrior stuff
right=%defaultroute
rightid=@xy.example.com
rightrsasigkey=0s1LgR7/oUM
# Start this connection when IPsec starts
auto=start
File Description 4.1: Road Warrior ipsec.conf file