CYBEX PP-ACO, Assembly Manual

Page: 25 / 54

Install Storage Connector
The following procedure shows how to install the Storage Connector (SX) to the CORE.
Tools Required:
• 7 mm Allen wrench (x2)
• 17 mm Open end wrench
• Torque wrench
Note: All screws must be torqued to 25-30 FT-LBS. (27.1-33.9Nm).
1.
Qty Description
2 Screw, M10 x 1.5, 65 mm 1
2 Washer 2
2 Nut, hex nylock 3
1 Bracket 4
1 Storage connector 5
2.
Qty Description
2 Screw, M10 x 1.5, 130 mm 1
2 Washer 2
2 Spacer 3
2 Nut, M10 x 1.5 socket head 4
1 Storage connector 5
Page 25 of 54