CYBEX PP-ACO, Assembly Manual

Page: 12 / 54

Install Top Mount
The following procedure shows how to install the top mounts to the CORE for the following products: PP-AP,
PP-AP41, PP-AXO, PP-ACOFS, PP-ACO, PP-ADC, PP-FCO, PP-FXO, PP-HL, PP-LP, PP-LPD, PP-RP, PP-RPL, PP-RWD,
PP-RW, and PP-TP.
Tools Required:
• 7 mm Allen wrench
• 17 mm Open end wrench
• Torque wrench
Note: All screws must be torqued to 25-30 FT-LBS. (27.1-33.9Nm).
1.
Qty Description
3 Screw, M10 x 1.5, 25 mm 1
3 Washer 2
3 Nut, hex nylock 3
1 Top mount 4
1 Core 5
2.
Qty Description
2 Screw, M10 x 1.5, 25 mm 1
2 Washer 2
2 Nut, hex nylock 3
2 Hole plug 4
1 Top mount 5
Page 12 of 54