Cybex Owner’s Manual
67
68
Maintenance
•
It is very important to have the unit regularly examined by a qualified technician to ensure the prod
-
uct is fit for use.
•
If the unit malfunctions, please refer to a qualified technician for repair or replacement of defective
parts immediately. Do not attempt to use the monitor until it has been inspected and repaired by a
qualified technician.
•
For inspection, installation and servicing, please consult qualified technician.
•
Failure to use a manufacturer approved repair technician may void any warranty claims.
Service Schedule
All maintenance activities shall be performed by qualified personnel. Failure to do so could result in
serious injury.
This is the minimum recommended service.
Determine distance
CYBEX
LOGO
Press and hold Cybex logo for 6 seconds to access
Screen
Lock
and
Toolbox
. See Preventive Maintenance section.
ENGLISH
LANGUAGE
ICON
Press and hold language logo for 6 seconds to access
Screen Lock
and
Toolbox
.
1.
Press the
Access
Toolbox
icon to access the
Toolbox
login screen.
2.
Enter the sequence:
.
3.
Press the
Statistics
icon to access the
Recorded Statistics
screen.
4.
Locate and tap the icon tor
Treadmill Totals
.
5.
Record Distance.
6.
Press the
arrow to return to the
Recorded Statistics
screen.
7.
Locate and tap the icon for
Belt
or
Deck
.
8.
Record Distance.
9.
If replacing the running belt, tap the
Belt
icon, then tap the
New Belt Reset
icon to reset
odometer.
10.
If replacing the running deck, tap the
Deck
icon, then tap the
New Deck Reset
icon to reset
odometer.
11.
Exit Set Up Mode by
tapping the
Toolbox
ico
n
, then tap the
Home
icon
. The screen
will refresh.
