2.
Press the
UP
or
DOWN
keys to select YES and press the
ENTER
key.
The console will beep twice and return to setup mode.
Reset E3 View Monitor
1.
Press the
Display Option
key at the first setup option screen (Time).
The console will display RESET and Reset Defaults? NO.
To exit without resetting, press the
ENTER
key.
2.
Press the
UP
or
DOWN
keys to select YES.
3.
Press the
ENTER
key to reset the console to the default values.
The console will beep twice and return to setup mode.
Exit Set Up mode
Press the
STOP
key to exit Setup options.
A/V Configuration and FM Radio Presets
Perform this procedure if the unit includes the optional Wireless Audio Receiver Module.
Tools Required:
Headphones (not included)
Setting up the Cybex Wireless Audio Receiver Module requires four steps:
1.
Determine the type of transmitter used (MYE 900MHz, Broadcast Vision 863MHz, etc. or TV FM).
2.
Set
A/V Device
to Wireless TV.
3.
Assign a TV channel number to each transmitter on the console.
4.
Add FM radio station presets (optional).
Determine transmitter type
There are two types of transmitters UHF or TV FM.
• UHF transmitters will have TV's identified by number, example TV1.
• TV FM transmitters will have TV's identified with FM frequencies, example 93.1.
TV FM Transmitters
Follow procedure: Setup TV FM Transmitters
UHF Transmitters
Follow procedure: Setup UHF Transmitters
Page 30 of 80
Cybex 525C/525R Cycle Part Number LT-24303-4 E