CyberPower CSB6012 User Manual Download Page 1

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CSB6012 Surge 
Protector. This manual explains the features and operation 
of the CSB6012. Please take a few moments to read 
this manual.

FEATURES

1.  ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15 A 
breaker. When an overload occurs, it will automatically 
switch off. To resume operation, ensure the overload 
condition is removed and reset the surge protector by 
switching the unit ON.

2. Standard Grounded Outlets (6)

SPECIFICATIONS

• Model Number: CSB6012
• Outlets: Standard Grounded Outlets (6)
• Surge Protection: 1,200 Joules
• Electrical Rating: 125 V/15 A/1875 W
• UL Clamping Voltage: UL 1449 3rd/400 V (H-N, H-G, N-G)
• Maximum Peak Current: 60,000A
• 3 AC Lines Protected: 

H-N: 30,000 A
H-G: 15,000 A 
N-G: 15,000 A
The maximum surge possible on household wiring is 
6,000 volts)

• Response Time: Less than 1 nanosecond
• Attenuation: Up to 32 dB
• Circuit Breaker: Resettable 15 Amp
• EMI/RFI Filtration: 150 kHz to 100 MHz

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK

 - Use only in 

dry locations and only indoors. 

DO NOT

 plug into another 

relocatable power tap. 

DO NOT

 “daisy chain” surge 

protectors. 

DO NOT

 use with any aquarium equipment. 

DO NOT

 use if properly grounded outlets are not 

available. 

DO NOT

 install this device if there is less than 10 

meters (30 feet) or more of wire between the electrical 
outlet and electrical service panel. 

DO NOT

 use for 

medical or life support equipment. This device features an 
internal protection that will disconnect the surge 
protective component at the end of its useful life, but it 
will maintain unprotected power to the load. If this 
situation is undesirable for the application, follow the 
manufacturer’s instructions for replacing the device. 

TROUBLESHOOTING

▪ 

If the ON/OFF is switched OFF, the 15 Amp circuit 

breaker may have tripped. Examine your connected 
equipment and remove the device that is overloading the 
circuit. Then, turn the ON/OFF switch back to RESET.

TECHNICAL SUPPORT

Please contact our Tech Support Department with 
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: [email protected]
• Hours of Operation: 

Monday – Friday 7:00am – 6:00pm CST

USER MANUAL

6-Outlet Surge Protector

CSB6012

6-Outlet Surge Protector

CSB6012

1

2

Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.

1

2

Reviews: