6
Copyright © 2012 CyberPower Systems, Inc.
Trouble Shooting
Problem
Possible Cause
Solution
The UPS LCD does not
perform expected runtime.
Do not set the UPS to
recognize the battery pack(s).
By pressing the display toggle to select
functions. Then, set up the correct battery
pack numbers. The default setting is 0.
The battery pack does not
work.
Batteries
are
not
fully
charged.
Allow the battery pack to charge for 24
hours. Do not expect full runtime during this
initial charge period.
Specified battery pack models can use AC
to shorten charge time.
The status of circuit breaker
is off.
Switch on the circuit breaker.
The fuse blew.
Contact CyberPower Systems.
Open the cover on the rear panel and
replace the new fuse.
Technical Specifications
Model
BPL48V75ART2U
AC Input Voltage
100-240V
DC Input Voltage
48V
Amperage
120A
Physical
Dimensions (in)
2U Rack, 17”x23.6”x3.5”
Weight (lbs)
96
AC Connections
AC Inlet type
IEC C14
AC Outlet type
IEC C13
Overload Protection
AC output circuit breaker
Battery
Sealed Maintenance Free Lead Acid Battery
12V/9.0AHX12
Interface
PP75
Recharge Time
Typically 5 hours
Built-in Charger
Yes
Environmental
Operating Temperature
32
℉
to104
℉
(0
℃
to 40
℃
)
Operating Relative Humidity
0 to 95%
Safety Approvals
Certifications
FCC Class A certified, cUL, UL1778, CE
RoHS
RoHS Compliant
Warranty
3 year limited warranty, Free Tech Support