CyberOptics SE505, Hardware Manual

Page: 7 / 180

CyberOptics Corporation vii
Preface
Preface
This SE505 Hardware Manual is intended to provide comprehensive information about the
SE505
system.
If you have any questions that are not answered by this guide, contact CyberOptics Customer
Service and Support. Refer to “
Technical Support ” on page ix.
Prerequisite Knowledge
●
Moderate computer experience
●
Moderate Windows
®
experience
Documentation
Documentation for the SE505 Solder Paste Inspection system consists of the following
information:
●
SE505 Hardware Manual
Provides an overview of SE505 components, instructions for how to install and maintain the
SE505 system, parts replacement information, and system specifications.
●
SE505 Solder Paste Inspection Software User Guide and Online Help
Provides task-based, step-by-step procedures and descriptions of the software controls for the
Solder Paste Inspection Applications— Engineering Interface.
●
SPI Systems Inspection User Guide and Online Help
Provides task-based, step-by-step procedures and descriptions of the software controls for the
Solder Paste Inspection Applications— Operator Interface.
Manual Change Request
Every effort has been made to provide complete and accurate information for operating and
maintaining the SE505 system. If you have suggestions for improvements or find an inaccuracy,
please complete the manual change request form on page viii and forward your suggestions to
CyberOptics.
i
Note: Include a copy of the change request form on the following page and, if applicable, a copy
of the page with the error marked.