CyberOptics SE505, Hardware Manual

Page: 69 / 180

CyberOptics Corporation 59
Shutting Down the System
Shutting Down the System
➢
To shut down the system
1. Stop the inspection process.
2. Press the E-Stop button.
3. Close the inspection application.
4. On the taskbar, click
Start
and then click
Shut Down
to shut down the system processor.
5. Turn off the power switch on the front of the unit. This removes all power from the system
with the exception of the processor power.
Figure 46. Shutting Down the System
➢
To remove power entirely
1. Turn off the power switch on the front of the unit.
2. On the rear of the machine, turn the AC main circuit breaker to OFF.
Caution:
Turning off power at the power switch does not remove power from the processor. The
AC main circuit breaker at the rear of the machine must be turned OFF to remove power
completely from the machine.
Power Switch