CyberOptics SE505, Hardware Manual

Page: 43 / 180

CyberOptics Corporation 33
Choosing a Location
8. Lower the leveling feet sufficiently to allow the forks of a pallet jack or a forklift under the
machine.
9. Using a pallet jack or forklift, move the machine to a desired location.
10. Remove all the transit securing brackets on X and Y axes before using the machine.
Figure 27. Transit securing brackets on X-Axis
Figure 28. Transit securing bracket on Y Axis
Choosing a Location
The SE505 system must be level and aligned with incoming and outgoing conveyor sections to
allow for smooth movement of panels.
Choose a location for the SE505 that meets the following requirements:
●
System has easy access to power and compressed air
●
Conveyor is level
●
Conveyor movement is smooth
●
System is not exposed to extreme ambient vibration