89
To compile a peak-acceleration summary report:
1)
Choose the menu item
Settings
>
Options
. The options dialog is displayed.
Figure 3. MultiView Options Dialog
2)
If you want the frequency and amplitude data shown horizontally in the report, check the box
Horizontal
layout for frequency and amplitude
. If you want the frequency data shown below the amplitude data in the
report, clear the check box.
3)
If you want the marks identified with the annotations for the marks in the first file you open, check the box
Use run1 annotations for markings column
. If you want the marks identified generically (Mark 1, Mark 2,
Mark
n
…,
and so on), clear the check box.
4)
Click
OK
.
5)
Choose the menu item
File
>
Create CSV File
>
Compile Summary Report
>
Peak Acceleration and Frequency
.
The AMS log files dialog is displayed.
6)
Select the files that you want to include in the report. To select a range of files, click the first filename, and
then shift-click the last filename. To select multiple files individually, select each using control-click. When you
have selected all files you want, click
Open
. The CSV file dialog is displayed.
