125
Periodic calibration and battery replacement is the only regular maintenance your AMS requires:
Annual Calibration and Battery Replacement
Once a year, you should have your AMS calibrated, and the internal rechargeable battery replaced by returning the
AMS to the CyberOptics factory.
Cleaning the AMS
If cleaning is required, wipe the outside of the AMS with IPA (isopropyl alcohol). However, do not apply IPA near
any of the humidity sensors. If the AMS is used in a clean environment, follow proper procedures for this
environment.
WARNING.
Do not immerse the AMS or the link module in liquid. Do not spill liquid on the AMS or on
the link module. Do not apply IPA near any of the humidity (HT) sensors.
WARNING.
The use of controls, adjustments, or procedures other than those specified in this manual
may result in exposure to hazardous optical radiation.
Annual Factory Calibration and Battery
Replacement
Every 12 months, you should return your AMS to the CyberOptics factory, where we will calibrate the AMS and
replace the internal rechargeable battery. You can find the date when the AMS was last calibrated at the factory by
choosing the
Help
>
About AMS View
menu item in the MultiView application.
