CyberLink YouCam, User Manual

Page: 54 / 75

48
CyberLink YouCam
6. If required, select to enable pen mode and use your mouse or finger to
draw on the presentation to highlight important points. Select to set the
color and pen size.
Note : select to enable eraser mode (and to set the eraser size). Use your
mouse or finger to erase any unwanted pen marks on the presentation, if required.
Select underneath the webcam preview window to clear all pen marks.
7. Select the button to stop capturing the presentation video. The
presentation video is placed in the captured content area, and saved to the
capture folder specified in
Capture & Snapshot Settings . The video is also
imported into the YouCam Media Library .
Note : if sharing the video presentation in IM mode, select another feature in
CyberLink YouCam to stop the presentation, or just end the video call.
Enabling Dual Webcam Videos
CyberLink YouCam lets you use two* webcams at once to record videos and in
webcam chats in IM mode for web conferencing.
Note : no visual effects can be applied when using two webcams, and CyberLink
YouCam sets the resolution to 640x480 for both. * this feature is not available in
some versions of CyberLink YouCam.
To enable a second webcam in CyberLink YouCam, do this:
1. Ensure that the second webcam is connected to your computer and turned
on.
2. Do either of the following to enable the second webcam:
select the Presentations tab of the YouCam launcher, and then select Dual
Video .
select Presentations > Dual Video from the drop-down menu that appears
at the top of most CyberLink YouCam windows.
3. On the Dual Video panel, Select your second webcam from the drop-down
list.
Note : video enhancements enabled in the Video Enhancement window are only
applied to the primary webcam's image.
4. Next, select one of the available layouts for your PiP webcam video.