S-VIDEO
is a higher quality connection than standard composite video, and requires a special S-Video cable (not
included). The S-Video connector is distinguishable by its 4 pins, as shown below. If your TV has an S-Video input,
it's recommended that you use this type of connection for better picture quality.
First, obtain a special S-Video cable. Connect the
S-Video output from the unit to the corresponding
input on your TV.
1
On your TV, select the S-Video input. This is
normally done by selecting "Video 2" or "AV2" with
the remote control. On some TVs, this is done by
selecting a particular channel.
2
S-Video
Input Jack
S-Video Cable
TV with
S-Video Input
S
VIDEO
INPUT
TV with
Component
Video Input
Y
Pb
Pr
VIDEO
INPUT
Component Video
Input Jacks
Y
Pb
Pr
Component
Video Cable
COMPONENT VIDEO
, the highest quality video connection, requires a special Component/P-SCAN Video Cable
(not included), with separate connectors for the Y, Pb/Cb, and Pr/Cr signals. You can only use the Progressive Scan
Video Out feature with a TV supporting Component Video Inputs and P-SCAN capability.
Obtain a special Component Video Cable and
connect the YCbCr outputs from the DVD Recorder
to those on your TV.
1
TO USE PROGRESSIVE SCAN
- Press
SETUP
to
enter the SETUP MENU and navigate to the A/V
OUTPUT / VIDEO menu. Move to the SCAN MODE
option with the
6
key and then select
PROGRESSIVE with the
4
key.
3
Select the Video Input on your TV that corresponds
to the Component Video Input.
2
i
If you do not see the video from the recorder on
your TV, press the
3
key to change the setting
back to INTERLACE - the default mode.
S-Video & Component Video Connections
Connections
11
ON
OFF
I
O
AC IN
~100-230V
VIDEO IN
AUDIO IN