Installing the 2-Port PoE Gigabit Switch
Network Connection
Operations Guide
930591G
CyberData Corporation
7
2.4 Network Connection
Figure 3. Front Panel of 2-Port PoE Gigabit Switch
Connect your devices (computer, router, switch, IP Phone, Wireless Access Point, IP Camera etc.) to
the ports with a CAT-5/CAT-5e/CAT-6 network cable. Since the switch supports Auto MDI/MDI-X, you
can use either a straight through or cross-over network cable.
Figure 4. Typical Installation of the 2-Port PoE Gigabit Switch
•
Connect the switch from the PD port to your central Gigabit PoE Switch.
•
Connect your IP Phone from the PSE port on the switch.
•
Connect your computer or other networking device to any of the PSE2 ports on the switch.
Link / Activity (green)
PSE-1 Power ON (yellow)
PSE-2 Power ON (yellow)
PD Power ON (yellow)
PoE Switch
