Quick Reference
930342E
© 2014, CyberData Corporation, ALL RIGHTS RESERVED
© 2014, CyberData Corporation, ALL RIGHTS RESERVED
930342E
Quick Reference
Connections
Mounting the Enclosure
Contacting CyberData
1-Sense (+)
2-GND
3-Relay COM
4-Relay NO
5-Line-In(+)
6-Line-In(-)
7-Line-Out(+)
8-Line-Out(-)
9-Spkr Out(+)
10-Spkr Out (-)
CLASS II WIRING
Speaker Connection
Line-Out Connection
Relay Connection
Sensor Connection
Line-In Connection
To mount the enclosure:
1. Prepare holes for the screws.
2. Plug in the power adapter and use the
green
Power
light to verify that the
power is on.
3. Plug the Ethernet cable into the V2
Loudspeaker Amplifier. The yellow
Link
light verifies the network connection.
4. For wall mounting, use the three
#6 x 1-1/4-inch Pan Head Phillip screws
to secure the speaker.
071057A
PHILLIP SCREW (3x)
#6x1 1/4" PAN HEAD
#6 PLASTIC ANCHOR (3x)
151014
531032
Sales: (831) 373-2601 ext. 334
Support: 831-373-2601 ext. 333
Web:
http://www.cyberdata.net/support/contactsupportvoip.php
RMA Dept: (831) 373-2601 ext. 136
Email: [email protected]
RMA Status:
http://www.cyberdata.net/support/rmastatus.html
Warranty information is available at:
Web:
http://www.cyberdata.net/support/warranty/index.html
Corporate Headquarters
CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA
Phone: 831-373-2601
Fax: 831-373-4193
www.CyberData.net
Getting Started
•
Download the
VoIP V2 Loudspeaker Amplifier Operations Guide
PDF file from the
Documents
page at:
http://www.cyberdata.net/products/voip/digitalanalog/loudspeakerampv2/docs.html
•
Create a plan for the locations of your paging amplifiers.
•
WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes.
•
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions.
•
WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant.
•
WARNING: The V2 Loudspeaker Amplifier enclosure is not rated for any AC voltages!
Wiring the 125V AC Plug
V2 Loudspeaker Amplifier Parts
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
The green wire with the yellow stripe is a ground connection for Electrostatic Discharge (ESD) protection,
and should not be removed.
To wire the 125V AC plug, consult a licensed electrician and the local building codes in your area.
(1) Assembly
(1) Wall Mounting Kit
(3) #6 Plastic Anchors
(3) #6 x 1-1/4-inch Pan Head Phillip Screws
(1) Enclosure
(1) CAT 5e/CAT6 cable
Additional Parts
View Inside of the Enclosure
(1) PoE Power Injector
Installation Quick Reference
VoIP V2 Loudspeaker Amplifier
(AC-Powered)
SIP Compliant
011095
The IP Endpoint Company
