User Manual 12 / 54 CPS Mini Central series
3.4 Transportation
The inverter is thoroughly tested and inspected strictly before delivery. Our inverters leave our factory in
proper electrical and mechanical condition. Special packaging ensures safe and careful transportation.
However, transport damage may still occur. The shipping company is responsible in such cases. Thoroughly
inspect the inverter upon delivery. Immediately notify the responsible shipping company if you discover any
damage to the packaging which indicates that the inverter may have been damaged or if you discover any
visible damage to the inverter. We will be glad to assist you, if required. When transporting the inverter, the
original or equivalent packaging should to be used, and the maximum layers for original carton is four, as this
ensures safe transport.
3.5 Storage of Inverter
If you want to storage the inverter in your warehouse, you should choose an appropriate location to
store the inverter.
The unit must be stored in original package and desiccant must be left in the package.
The storage temperature should be always between -25
℃
and +70
℃
. And the storage relative
humidity should be always between 0 and 95%.
If there are lots of inverters need to be stored, the maximum layers for original carton is four.
After long term storage, local installer or service department of CyberPower should perform a
comprehensive test before installation
After long term storage, the Real Time Clock of the inverter maybe
not correct, it will cause the Energy produced today (E_day) error,
you need to set the time and date, refer to Fig 6.3.15 or 6.4.3 text
line.
3.6 The advantage of the CPS Mini Central inverters
The features of CPS Mini Central series inverter are below:
Dual independent MPP trackers
Integrated DC disconnect switch
Wide PV voltage range
：
300V~1000V
The maximum efficiency is 98.2%
The Europe efficiency is 97.8%
IP65 environmental protection
Easy to install
