CA-901
BT CM
WIRELESS SPEAKER POD
Your CA-901BT speaker contains Bluetooth® technology, allowing you to wirelessly play music from nearly
any Bluetooth enabled device. Now you can enter the room, select music to play on most smartphones,
tablets, or laptops, and control your listening enjoyment from the comfort of your lap. From your device, you
can easily control and change music tracks, playlists, adjust volume up or down, or even listen to podcasts,
or many other audio applications available on your device.
Congratulations
Wireless speaker pod
Cables
Owner’s Guide with connection diagram
Box contents
• Read Instructions Carefully – All safety and operating instructions should be read before this device is operated.
• Heat – Keep speakers out of extreme heat and away from sources producing extreme heat, such as, space heaters, radiators, stoves and other devices
emitting heat.
• Water and Moisture – Keep speakers out of the rain and humid conditions to avoid electric shock. Keep speakers away from water, such as, sinks, bathtubs,
swimming pools, washing machines, tubs of water, etc. in order to avoid electric shock. Keep water from dripping on the device, do notput objects
containing water, such as vases on top of the device, and do not put the device near standing water.
• Cleaning – Use a dry cloth for cleaning. Do not wipe any part of the system with cleaning solvents, such as, furniture wax, bleach, benzene, or ammonia.
Speaker connection
Caution
Please read the step by step instructions along with the diagrams provided.
Charging
• Turn off the sample.
• Plug in the included USB charging cable for charging (mini-USB plug to speaker and standard USB plug to USB power source).
• LED will be red while the speaker is charging.
(LED will be purple while the speaker is powered on and charging)
USB cable for charging
:03
1
2
3
4
5
CA-901BT
Connected
Headset
Not Connected
AUX
3.5mm
(not included)
Pairing with the speakers for the first time
Before you start, please fully charge up the CA-901BT speaker.
Ensure the Bluetooth capability of your source device is turned on and ready to discover new items. If needed, see your device’s instructions to add or setup a Bluetooth
device.
When you first turn on the CA-901BT speaker system, the Bluetooth functionality is not engaged. Below steps are the guidelines for you to connect with CA-901BT speaker.
To wirelessly connect with the Bluetooth function of your speakers:
1. Make sure the speaker is fully charged up. Switch on the device by press & hold the Power / Bluetooth button for 3 seconds, or until you hear an audible melody. The
device is now switched on with blue LED light up.
2. Press the Power / Bluetooth button for once to trigger “Bluetooth pairing” mode. You are hear another audible melody and LED will now blink in red and blue alternatively.
3. With your audio source (smartphone, tablet, iPod, etc.), find the Bluetooth device list and look for “CA-901BT.” Select it to pair/connect with the speakers.
4. When the device connects, you will hear a short audible beep, the LED will stop blinking and will turn to a solid “on” state.
5. Now you can go to your music applications; start play and enjoy your music.
Turning off your source device will automatically disconnect your speakers. If you plan on not using your speakers again for an hour or more, we recommend you turn off your
CA-901BT speakers to save battery until you are ready to listen again.
Pairing with the speakers after the first time
Once you’ve successfully paired your speakers, your device will automatically connect with it on successive returns to the room in which they are situated. You will be able to
immediately go the audio application of your choice, select your audio tracks, and begin enjoying almost at once.
Powering off the speakers by pressing and holding for approximately 3 seconds will disconnect from your source device automatically Turn your speakers back on by pressing
and holding for 3 seconds, while your device is still Bluetooth enabled, will allow your device to reconnect within just a couple of seconds, without any further effort.
Disconnecting and pairing with a new device
Ensure the speaker is fully charged up. Switch on the device by press & hold the Power / Bluetooth button for 3 seconds, or until you hear an audible melody. The device is
now switched on with blue LED light up.
Repeat step 2 – 5 as with the first time you connected with the speaker. .
Playing Audio via AUX in jack*
1. Make sure the speaker is fully charged.
2. Power on the device by pressing and holding for about 3 seconds on the power / Bluetooth button.
3. Plug in a 3.5mm AUX cable into AUX jack.
4. Connect another end of the AUX cable with your secondary audio source.
5. Music will play from the speaker system when you start the playback on the secondary audio source
* AUX input is prioritized (overrides Bluetooth audio source) whenever a 3.5mm cable is plugged in.
