CYBELEC DNC 600S, User Manual, Page: 54 / 116

Save this product in the internal memory by proceeding as follows:
Introduce the number you wish to give the product in the
P
field, in
this case the number
1
for this product which will be used later as an
example.
Press the key.
If the system replies with the message
EXISTS
, choose another
number.
M
ODIFYING A
P
RODUCT
If you wish to modify a product programmed in L-alpha, call the product
from the
PRODUCT L-alpha page.
Deleting a Bend
Place the cursor on the N field and enter the number of the face to be
deleted.
Press the key; the face containing the bend is deleted.
Adding a Bend
Place the cursor on the
N
field and enter the number of the face in
front of which you wish to insert a new face.
Press .The system inserts a line and copies the data of the
current bend. Modify the LENGTH and ANGLE fields.
Start the calculation by pressing .
Continue in the next chapter. The definition of the bending order has
to be reprogrammed.
APPENDIX F: PROGRAMMING WITH L-ALPHA PAGE 45