CYBELEC DNC 600S, User Manual, Page: 43 / 116

A
PPENDIX
E: T
OOL
P
ROGRAMMING
The DNC 600S has several pages which allow consultation of the list of
existing tools, to display them and / or program new ones.
The DNC 600S memory can hold a maximum of 20 punches and 30 dies.
P
UNCH
L
IST
From the main menu choose option LIST OF PUNCHES .
The system displays the list of punches existing in the memory, with
the number and characteristics of each punch:
If your DNC contains more than 4 punches, you can call the following page
or pages by pressing .
Die List
From the main menu, choose option LIST OF DIES .
The consultation of the list of dies can be done in the same way as explained
for the punches.
P
ROGRAMMING
P
UNCHES
/ D
IES
T
OOL
P
ROGRAMMING
O
VERVIEW
The programming of tools is done by introducing their values and
dimensions on the page as represented below.
Call the
PROGRAMMING PUNCH / DIE
page (via the main menu).
p Punch angle.
Hp Height of the punch between the lowest part of
the beam and the point of the punch.
rp
Punch radius.
TON/M
Maximum force supported by the punch per
linear meter.
Vd V width of the die.
PAGE 34 USER GUIDE DNC 600S