CYBELEC DNC 600S, User Manual, Page: 17 / 116

C
REATING A
P
RODUCT
This paragraph explains how to programme a product as well as the method
for correcting and recording it.
U
SING THE
S
EQUENCE
P
AGE
This page displays all the bending informations for the current sequence.
That is the requested position of the Y and X (R, etc.) axes, the pressure, the
gauge retraction, the crowning, the dwell time, etc.
Important This page displays the result of the calculations made when programming a
product in the L-alpha page with definition of the bending order.
The operator can modify these values if necessary (especially the retraction,
the dwell time, the top dead center).
However he must avoid to directly modify the Y and X values calculated by
the DNC.
Hint
An operator can directly program a product in this page, without "passing"
through the L-alpha page and definition of the bending order.
This simplifies the manipulations a great deal, since all the informations
required for the bending are on this page.
To reach the sequence page, press the key.
Pressing once will display the page in large characters, pressing twice
will display all dimensions and functions of the current sequence in small
characters.
Pressing the key 3 times will display the main sequence data in large
characters, with a graphic of the part underneath.
This page is displayed during the powering-on of the DNC.
To change from one sequence to another, press the or
key.
In order to add a new sequence with the same content as the last sequence at
the end of the program, press , then 1 when the warning message
displays.
In order to insert after the current sequence a sequence with the same content
as the current one, press when the cursor is on the N field.
The key is used to move the cursor from one significant field to
another.
The key is used to move the cursor across all the fields. This function
can be deactivated in the user preferences.
PAGE 8 USER GUIDE DNC 600S