18/34
CybTouch 8 G – User Manual
A
ug
.
2016
V3.1
Anti-twist
The anti-twist function can be activated/deactivated using this button. This is a sequence
function that can be individually used or adjusted for each step of the program.
When activating the function, the button turns to green
and a numerical pad is
display, where the operator must enter the required anti-twist pressure (as a percentage
of the maximum pressure allowed).
Thin sheet support
The thin sheet support function is activated/deactivated with this button. The button turns
to green
when the function is activated.
This is a sequence function that can be individually used for each step of the program.
Ejector
The ejector function is activated/deactivated with this button. It pushes the remaining
piece of sheet metal towards the inside of the machine.
The button turns to green
when the function is activated.
Scrap hatch
The scrap hatch function is activated/deactivated with this button. It opens a special
compartment inside the machine to retrieve scrap cuts.
The button turns to green
when the hatch is open.
Auxiliary functions
The type of auxiliary function controlled by this button depends of the configuration of the
machine.
Touching the button activates one, the other or both functions at the same time. The
activated function’s half of the button turns green when activated.
