User Manual
–
CybTouch series
CybTouch series
–
User Manual
J
AN
.
2020
V5.0
16/98
Touching
Materials
opens the Materials page, where the default characteristics for each
material can be changed, or a new material can be configured.
This page may not be available, depending on the machine parameters’
configuration. To be allowed to access the Materials page, a level 2 password is
required
The Materials page displays:
•
Material
: Selected material (here
Steel
).
•
Default thickness
for the material.
•
Default sigma
: Default sigma for the material (here
45
).
•
Displayed
: If the material will be available to be selected for use (here
yes
).
•
K DIN 6935
: Allows to correct the blank length accordingly to DIN 6935.
•
Predefined thickn.
: Allows defining up to 7 different predefined thicknesses for
the selected material.
•
Thickness min/max
: Determines the maximum and minimum accepted thickness
for the selected material.
Three predefined default materials are available (steel, stainless steel, aluminium), but
others can be added.
To add a material:
1.
Touch
Material
and select a non-configured material (Mater X) from the list.
2.
Enter the new material’s characteristics.
Materials
