PlayStation
®
Input Output
Quick Start Guide
9510-2412
25C18 R1.1
2. Copy the Menu System
y
Format an SD Card (4 GB to 32 GB Cards
should be formatted as FAT32 and anything
above 32 GB must be formatted as exFAT).
y
Download the PSIO Menu System from:
http://ps-io.com/downloads
y
Copy and paste
‘MENU.SYS’
to the root of
the SD Card.
3. Add Software Images
y
Find an image that you would like to add
to the SD Card.
y
Ensure it is a PlayStation® format image
(BIN, ISO or IMG extensions permitted only).
y
Copy it to a folder on the SD Card.
EG:
’SD:\DEMO 1\demo1.bin’
(where
’SD:\’
is the root directory).
Copyright 2010-2019 Cybdyn Systems®
http://cybdyn-systems.com.au/
Quick Start Instructions
Quick Start Gu
PlayStation
®
Input Output
1. Install the Switch Board
For PSIO to function, a Switch Board
must be soldered onto your PlayStation®
mainboard. Failure to do so will render the
cartridge unusable.
y
Locate the included Switch Board Kit in this
box. The kit contains the Switch Board, label
and wire.
y
Install the Switch Board by soldering it onto
your PlayStation® mainboard.
NOTE:
The Switch Board installation guides
and information about why this is required are
available at:
http://ps-io.com/switch_board
9510-2412
Printed in China
