Instruction manual
FO SERIAL
Page 12
5.3.1. Menu 1 : Configuration
1.
View a configuration
: the arrows select the configuration to view, either the current configuration (Active), or the factory configuration
(Factory), or one of the user defined configuration ([user n]).
2.
Edit a configuration
: the arrows select the model of configuration to use. Parameters are edited in a memory dedicated to editing: this
memory could be then saved into a user memory, eventually the model one.
3.
Activate a configuration
: the arrows select the configuration that will be active when the unit will restart. It could be the factory or any
user defined configuration. Warning: this option restarts the FO. The active configuration is spotted by an asterisk ‘*’. This operation must
be confirm or aborted by a choice Yes / No.
4.
Remove a user configuration
: This option is displayed only if user defined configurations are stored in memory. The arrows select the
configuration to be removed. The factory configuration becomes the active configuration at the next restart of the unit if the active
configuration is removed. This operation must be confirm or aborted by a choice Yes / No.
5.
Save configuration
: this option is displayed after a configuration has been edited. The arrows select the user-defined memory where the
edited configuration will be stored. This may overwrite an existing configuration, or define an empty configuration. In this case a name can
be given to the configuration. This operation must be confirm or aborted by a choice Yes / No. Warning: the configuration does not
become active when it is saved – see the previous option (3)
CXR - FO 8035
Configuration menu
Configuration "cxr*"
DTE=1984Kbps, CLK=INT
1) View a configuration
2) Edit a configuration
3) Activate a configuration
4) Remove a user configuration
--------------------------------------------------------------------------------
Type your choice: 1 .. 4, P(revious) and press RETURN
--------------------------------------------------------------------------------
