Instruction manual
FO SERIAL
Page 11
5.3.
VT100 Interactive Menus
The FO sends the VT100 menu pages when it detects three consecutive <CR> or 'ENTER' characters.
The possible choices are listed on the bottom line of the screen:
1 to 9 are valid options on the menu to start a sub-menu or to change a parameter value
P or p: to return to the Previous menu
Q or q: to Quit the VT100 menus and return to the AT command mode
Acknowledge your choice by Enter (or CR)
Some parameters should be selected in a revolving list which can be exited by the ‘#Abort operation#’ choice in any need of aborting the current
selection.
The arrow keys must be used in some menus. Some VT100 terminal emulation software may need some settings to allow the use of these
keys (HyperTerminal,). The / * - + key may also be used in case of problem.
LEFT:
/
RIGHT:
*
UP:
-
DOWN:
+
First menu :
The first menu provides access to the configuration, status and statistics displays and loop test sub-menus.
The item ‘display and passwords’ access to a submenu for the choice of passwords, language (English or French) and display mode
Press ‘Q’ to exit the VT100 menus and return to the AT command mode.
CXR - FO SE35
Main menu
Configuration "cxr*"
DTE=1984Kbps, CLK=INT
1) Configuration
2) Status and statistics
3) Loop test
4) Display and passwords
5) Remote
--------------------------------------------------------------------------------
Type your choice: 1 .. 4, Q(uit) and press RETURN
--------------------------------------------------------------------------------
FO8000 V1.36 - Dec 19 2006 - 0143CFD8
SN: 00009010 - 5001
