CWT CWTLAM-160, Use And Maintenance Manual

Page: 36 / 60

5.7.2 Pneumatic connection
The following figure shows where to make the pneumatic connection.
The pneumatic connection of the machine is the responsibility of the customer.
The pneumatic connection must only be carried out when positioning/fixing has been completed and when all the
parts making up the machine have been assembled.
Pneumatic line connection point with quick coupling. A.
Pressure regulator.
B.
Pressure gauge. C.
Provide a manually operated interception valve on
the supply line upstream of the connection point.
EXPRESS
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 771027010
REVISION: 0
DATE: 29/11/2018
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
30