CWT CWTLAM-160, Use And Maintenance Manual

Page: 19 / 60

2.2 Operating principle
The HOT ROLLER LAMINATOR performs mounting, laminating and laying of tape and double-sided adhesive application on
various types of materials. The machinable materials are indicated in the technical data tables.
Machining is carried out by passing the material on a pair of rollers.
The upper rubber roller is equipped with temperature adjustment.
The machine is equipped with a control panel with a display through which the operator can set and view all functions, like for
example upper roller temperature adjustment and speed.
2.3 Intended and improper use
The HOT ROLLER LAMINATOR has been designed solely to mount, laminate, apply application tape and double-sided adhesive.
The dimensions, material and weight of the machinable products are reported in the technical data.
For the material passage diagrams see par. 7.10.
Danger
The machine has not been designed to operate in potentially explosive areas.
Warning
The machine must only be used for the purposes for which it was designed and built and as established in the contract.
In case of malfunction, failure, breakage etc., always consult this manual before working on the machine. Contact
FLEXA S.r.l. when necessary.
Do not use the machine with products that are of a size or raw material differing from those for which it has been built
and defined in the contract.
EXPRESS
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 771027010
REVISION: 0
DATE: 29/11/2018
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
13