1.10 Warranty
1.11 Assistance
The purchaser must contact the Manufacturer directly (or the service centre if present) for any need related to the use,
maintenance or request for spare parts, specifying the machine identification data indicated on the identification plate.
The Customer can make use of the technical sales support of local agents or importers who are in direct contact with the
company FLEXA S.r.l.
In the event of failure or inconvenience that cannot be overcome, the Customer must directly contact the manufacturer whose
contacts are as follows:
The warranty is supplied separately or with the contract.
TELEPHONE:
+46 554 33390
EMAIL:
ASSISTANCE DEPARTMENT:
WEBSITE:
www.cwtworktools.com
MAILING ADDRESS:
Årstidsvägen 8
665 35 Kil
Sweden
In the event of a change of ownership or company movement of the machine, it is always necessary to inform the
manufacturer or the reference service centre, even after the warranty period.
EXPRESS
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 771027010
REVISION: 0
DATE: 29/11/2018
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
9
Summary of Contents for CWTLAM-160
Page 2: ......
Page 59: ......
Page 60: ...FLEXA Sr l reserves the right to make technical changes to this manual without prior notice...