24
7.Installation of Procedures
7.1.
Installation
Install the third party application procedure
1. Click “file manager” application procedure; choose the application procedure you need to install.
2. Hold the application procedure you need to install.
3. It popup
install, click install apk.
4. Finish the installation as guide, it will operate.
Note: The third party procedure searched from internet to use on the system are all suffixed with .apk.
7.2.
Uninstall
Uninstall application procedure
1. Click setting icon in main interface.
2. Click
apps
, list all the application procedures installed in the system.
3. Click the APK you want to uninstall, click
uninstall
.
4. Click
confirm
to finish uninstallation.
Skill: The procedure manager installed by system has many convenient methods to uninstall after
opening procedure manager, click uninstall, it will list all the application procedures installed by system.
8.Trouble Shooting
Before contacting the service center, you are advised to follow the instructions below:
• To have optimal operation, fully charge the battery.
• To improve the device’s performance, remove unnecessary files or apps on your device.
• To update your system software, use the
System > updates
command in your device’s settings.
• To set your device to factory default, use the
Reset options
in the device’s settings. All your device data will be
lost permanently. It is strongly advised to fully back up your device before resetting.
My device can't be switched on
• When the device can't be switched on, charge for at least 10 minutes to ensure the minimum battery power
needed. Then switch it on again.
My Device has not responded for several minutes
• If your device doesn’t respond, turn off your device by pressing and holding the Power key until it turns off and
then restart it again.
• If your device has a removable battery, remove the battery and re-insert it, then restart the device.
My device turns off by itself
• When your device turns off by itself, make sure that the Power key is not accidentally pressed.
• Check the battery charge level.
• If it still doesn't work, Factory reset the device via the Reset options in the device’s Settings. Make sure you have
backed up your data.
Summary of Contents for F10W
Page 1: ......
