Custom Audio Electronics STIMARE STIMA-SML, User Manual

Page: 82 / 86

12.3 Logos management
It is possible to store new logos in addition to default logos stored on Flash Disk. The device automatically provides to
convert BMP image to the error-diffusion format in black and white.
It is possible to directly add the new logo directly into the folder “PICTURES” on the Flash Drive of the device.
To enter the Flash Drive by iles sharing from Mass Storage, you need to enable the relative parameter during the con
-
iguration process (see chapter 5).
After adding the logo, open the coniguration ile “PictList.ini” and add a new line with a number associated to the logo
(to be used with device’s commands), a letter for the memory unit and the logo ile name, as indicated in the instructions
written inside the “PictList.ini” ile.
To delete a logos stored in the device, proceed as follows:
1.
delete the selected logo from the “Pictures” folder on Flash Disk;
2.
in the coniguration ile “PictList.ini”, delete the line related to the erased logo.
The logos stored on Flash Disk and converted by the device, can be printed by using the number associated to the logo
during the conversion step.
The correspondence between ile-name and logo-number is warrant by the coniguration ile “PIctList.ini” and it is veriiable
with the logo test.
12.4 Fonts management
It is possible to store new font in addition to default fonts stored on Flash Disk.
You can directly add the new font directly into the folder “FONTS” on the Flash Drive of the device.
To enter the Flash Drive by iles sharing from Mass Storage, you need to enable the relative parameter during the con
-
iguration process (see chapter 5).
NOTE:
Uploading the new font directly from the “Font” folder of Microsoft
®
Windows
®
directory, remember that the displayed
font name into the “Font” folder may not match the real name of the font ile.
82
CUSTOM-Powered