Custom Audio Electronics Q1, User Manual

Page: 31 / 48

<27>
Q Q
1 1
SETUP: SETUP:
GB
1 Go into SETUP mode by starting to press the
FEED Key before switch on the printer and going
on to press it for a few seconds after the printer
power up.
2 The printer should print all list of the parameters:
RS232 Baud Rate
(1)
: 115200, 57600, 38400,
19200
D
, 9600, 4800, 2400, 1200.
RS232 Data length (1) : 7, 8 D bits/char.
RS232 Parity (1) : None D , even or odd.
RS232 Handshaking (1) : XON/XOFF D or Hard-
ware.
Busy condition
(1)
: OffLine/RxFull or RxFull
D
.
USB Address Number (2) : 0.
Autofeed: CR disabled D or CR enabled.
Print mode: Normal D or reverse.
Chars/inch: A=11 B=15 cpi, A=15 B=20 cpi
D
.
Speed/Quality: Normal
D
or High Quality.
PaperEnd Buffer Clear: Disabled, Enabled D .
Print Density: -50%, -37%, -25%, -12%, 0 D
,+12%, +25%,+37%, +50%.
Notes: The parameters indicates with a D symbol
are the default values.
Note (1) : Parameter valid only on serial printer.
Note (2) : This parameter is used to identify univocally
the USB printer by a numerical address code,
if on the PC are connected two printers that
are the same models, for example two Q1.
•
•
•
•
•
•
•
•
•
•
•
•
NOTE:
See chapter 1 for FEED key functions.
Q
1
Q
1
PRINTER SETUP
PRINTER TYPE .............................Q1
PRINTING HEAD TYPE .................C72
INTERFACE ...................................RS232
PROGRAM MEMORY TEST..........OK
STATIC RAM TEST........................OK
EEPROM TEST..............................OK
CUTTER TEST...............................OK
HEAD VOLTAGE [V] = 24,29
HEAD TEMPERATURE [°C] = 26
POWER ON COUNTER = 28
PAPER PRINTED [cm] = 40
CUT COUNTER = 573
RS232 Baud Rate .....................: 19200 bps
RS232 Data Length ...................: 8 bits/chr
RS232 Parity .............................: None
RS232 Handshaking .................: Xon/Xoff
Busy Condition ..........................: RxFull
USB Address Number ...............: 0
Autofeed ....................................: CR Disabled
Print Mode .................................: Normal
Chars / inch ...............................: A=15 B=20 cpi
Speed / Quality..........................: Normal
PaperEnd Buffer Clear ..............: Disabled
Print Density..............................: 0%
[PUSH] key to enter setup
[FAST PUSH] key to skip setup